Rhys' EE Adventures

Don't let the smoke out

  • Home

PLC Based PID Controller and Simulated Process

Posted by Rhys on 27 June 2015
Posted in: Uni Projects.

ControlledHMI

The purpose of this project was to use two standalone Programmable Logic Controllers (PLCs) where one is simulating a process (with artificial noise and disturbances) and the other PLC is acting as a controller. We decided to also include a Human Machine Interface (HMI) to allow the for both monitoring of key information and to adjust/reset the controller parameters.  Click Here to be taken to the dedicated sub-site

Posts navigation

← PLC Controlled Tabletop Gantry Apparatus
Touch Controlled Automatic Coffee Machine (PLC+HMI) →
  • Recent Posts

    • Pineapple Cam
    • Toastmasters Speech Timing System
    • A very expensive Etch-A-Sketch (+Extensions)
    • Driving a multiplexed 512 LED panel from the stack
    • PicAXE based Motor Driver
  • Recent Comments

    • Archives

      • July 2017
      • January 2016
      • December 2015
      • November 2015
      • October 2015
      • August 2015
      • June 2015
      • May 2015
      • February 2015
    • Categories

      • Personal Projects
      • Uni Projects
    • Meta

      • Log in
      • Entries feed
      • Comments feed
      • WordPress.org
    • Recent Posts

      • Pineapple Cam
      • Toastmasters Speech Timing System
      • A very expensive Etch-A-Sketch (+Extensions)
      • Driving a multiplexed 512 LED panel from the stack
      • PicAXE based Motor Driver
    • Recent Comments

      • Archives

        • July 2017
        • January 2016
        • December 2015
        • November 2015
        • October 2015
        • August 2015
        • June 2015
        • May 2015
        • February 2015
      • Categories

        • Personal Projects
        • Uni Projects
      • Meta

        • Log in
        • Entries feed
        • Comments feed
        • WordPress.org
      Proudly powered by WordPress Theme: Parament by Automattic.